3.25-inch Probe Rods
GeoprobeŽ brand 3.25 in. probe rods have many uses are are proven performers in
terms of durability and ease of use.
TYPICAL APPLICATIONS for 3.25 in. Probe Rods:
- Installation of Prepacked Screen Monitoring Wells
- Dual Tube soil sampling with the DT325 System
- Standard Penetration Testing (SPT)... DH100 Drop Hammer
ROD SIZES:
| Part No. | Running Length | Weight | |||||||||||
| 9040 | 60 in. | 1,524 mm | 49.6 lb. | 22.5 kg | |||||||||
| 10594 | 48 in. | 1,219 mm | 37.9 lb. | 17.2 kg | |||||||||
| 18405 | 24 in. | 610 mm | 19.9 lb. | 9.0 kg | |||||||||
| 13672 | 12 in. | 305 mm | 9.9 lb. | 4.5 kg | |||||||||
| 13925 | 39 in. | 1000 mm | 32.6 lb. | 14.8 kg | |||||||||
| 3.25 in. (82.6 mm) OD and 2.625 in. (66.7 mm) ID. The largest Geoprobe® brand rods, designed specifically for 6600 series machines. Designed for dual tube sampling, setting larger diameter monitoring wells, and conducting standard penetration tests. The 2.625 in. ID makes it possible to deploy nominal 2.0 in. PVC pipe and to work with larger tooling downhole. Manufactured under a patented design with a proprietary rounded thread system that's hardened for maximum durability. | |||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
3.25 IN. ROD SYSTEM COMMONLY USED WITH:
|
3.25 in. (82.6 mm) OD and 2.625 in. (66.7 mm) ID. The largest Geoprobe® brand rods, designed specifically for 6600 series machines. The 2.625 in. ID makes it possible to deploy nominal 2.0 in. PVC pipe and to work with larger tooling downhole. Manufactured under a patented design with a proprietary rounded thread system that's hardened for maximum durability. |
|||
 |
Drive Cap (9742) for GH60 Hammer |
|
DT32 Cutting Shoe (21533) undersized | |
 |
Drive Cap (10605) for GH40 series hammers |
 |
DT32 Expendable Cutting Shoe (13567), 1.85 in. (47.0 mm) core | |
 |
Expendable Point Holder (12270) |
 |
DT32 Expendable Cutting Shoe (16671), 1.7 in. (43.0 mm) core | |
 |
Expendable Drive Point (AT3215) |  |
DT32 Expendable Cutting Shoe Holder (10308) | |
 |
Solid Drive Point (9729) |  |
RS60 Cutting Shoe (15390) | |
 |
Pull Cap (13257) |  |
RS60 Cutting Shoe (18891) | |
 |
O-rings for 3.25 in. Probe Rods (9960) |  |
RS60 Drive Head (15391) | |
 |
Expendable Point Holders (9796, 60 in.; 10596, 48 in.; 13926, 1 m) |  |
RS60 Drive Head (18773) | |
 |
DT32 Cutting Shoe (10299) standard, 3.5 in. (89 mm) OD |
 |
SPT Solid Drive Tip Assembly (21114) | |
 |
DT32 Cutting Shoe (13338) optional, 3.75 in. (95.3 mm) OD |
 |
O-rings for SPT Solid Drive Tip Assembly (19744) | |
 |
Mill-Slotted Rod Section (16135) 48 in. (1,219 mm) running length |
|||
